Anime Collectibles
Gunpla: Mobile Suit Gundam 00 - " GN-001 Gundam Exia + GNR-001E GN Armor Type-E", HG 1/144
Here's a great set that includes snap-fit plastic kits of GN Arms Type E and Gundam Exia in Transam mode! Just when the Celestial Being's Mobile Suits were about to be annihilated by the new GN-X units from the three superpower nations, in comes GN Arms and pilot Lasse Aeon to the rescue! As in the show, GN Arms can switch to GN Armor mode to allow Gundam Exia to dock with it for a major boost in both speed and firepower. The weapons included with GN Armor mode are two large GN swords, two GN beam guns, and two large GN cannons. The included Gundam Exia kit is almost the same as the previously released HG Gundam Exia, with the exception of red plastic parts and red foil stickers to build it in Transam mode. A display base is included.
$66.00
-
Gunpla: Mobile Suit Gundam 00 - "CB-001.5 1.5 Gundam", HG 1/144
Here in 1/144 scale glory is Leif Recitativo's 1.5 Gundam! For an HG Bandai has used a generous amount of poly caps in the design of this kit and the result is one of the most posable HGs ever. The 1.5 transforms between Stand By Mode, Attack Mode, Flight Mode, Alvaaron Cannon Mode,and High Speed Mode with a few simple changes thanks to the uniquely designed binders joints on its back. it comes equipped with its GN Beam Saber, GN Shield, Binder Rifle, GN Buster Rifle, and Alvaaron Cannon. Marking stickers are also included.
$23.00
-
Gunpla: Mobile Suit Gundam 00 - "GN-000 0 Gundam [Type A.C.D.]", HG 1/144
Based on Mobile Suit Gundam 00, the 0 Gundam (Type A.C.D.) model kit is in 1/144 scale and becomes a fully articulated figure once complete. The 0 Gundam comes with beam rifle, shield, and beam saber.
$18.00
-
Gunpla: Mobile Suit Gundam 00 - "GN-000 O Gundam (Gray)", HG 1/144
The HG (High Grade) 1/144 #52 O Gundam model kit is from the "Mobile Suit Gundam 00" series, showcasing the O Gundam which is notably the prototype mobile suit that inspired the design of the iconic RX-78-2 Gundam. This model captures the simplicity and elegance of one of the earliest mobile suits in the Gundam 00 universe.
$15.00
-
Gunpla: Mobile Suit Gundam 00 - "GN-0000+GNR-010 00 Raiser + GN Sword III", HG 1/144
Here's a superb set that not only pairs up the previously-released HG 00 Gundam with HG 0 Raiser, it also includes its most powerful weapon GN sword III with a clear pink beam effect part! Both kits come molded in color and 00 Gundam will be fully articulated with polycapped joints upon completion. Like its anime counterpart, 0 Raiser can dock with 00 Gundam to form 00 Raiser. Weapons include two GN sword IIs and one GN sword III that can switch to GN rifle II and GN rifle IIIs respectively, two GN beam sabers, and a shield. Foil stickers are included for detail. A black stand is also provided to assist with displaying the completed model in dynamic mid-air poses.
$29.00
-
Gunpla: Mobile Suit Gundam 00 - "GN-0000+GNR-010 00 Raiser", HG 1/144
GNR-010 00 Raiser + GN Sword III of the final battle specification is the product of a normal color! – Effects are clear parts. GN Sword II also included of course. Sword mode rifle mode can be converted to GN Sword III. Effects blade part of GN Sword III also reproduced in clear plastic.
$23.00
-
Gunpla: Mobile Suit Gundam 00 - "GN-0000+GNR-010 00 Raiser", PG 1/60
The GN-0000 00 Gundam is the successor unit to the GN-001 Gundam Exia. The 00 possesses many of the previous generation’s standard features, including the GN-Drive and Trans-AM System, but also introduces the revolutionary Twin Drive System, a cutting-edge GN technology originally conceived by Aeolia Schenberg himself. The system uses two GN-Drives with compatible GN-particle production as the basis for the system's operation. With their productive synergy, the amount of particles the two drives can produce is squared. The utilization of synchronized GN-Drives can create awesome power, some of which defies common sense. Ultimately 00 Gundam's technical complications couldn't be corrected without the addition of new equipment. The solution(s) to 00 Gundam's Trans-Am system came in the form of energy stabilizer equipment, built onto the 0-Raiser. The 00 was finally completed at Lagrange 3 when the GNR-010 0-Raiser was combined with the 00 to form the 00-Raiser. Even though Setsuna didn’t have the 0-Raiser at first, that doesn’t mean you can’t! This kit includes both separate units that can of course be combined to form the 00-Raiser. With specially-made joints to hold the weight, you can pose this model in any way you want to display its awesome power! Pre-assembled GN Drives with lighting and motion gimmicks are included for the shoulders of the 00 Gundam, as well as the GN Shield, 2 GN Sword IIs, and the massive GN Sword III!
$326.00
-
Gunpla: Mobile Suit Gundam 00 - "GN-0000GNHW/7SG 00 Gundam Seven Sword/G", HG 1/144
An enhanced model of 00 Gundam from "The Side Story of Mobile Suit Gundam 00V". Seven sword/G, a special variant machine of 00 Gundam, comes out as an HG kit with a newly equipped large-size rifle, the GN Sword II Blaster. Includes GN buster sword. You can transform it from Sword Mode to Shield Mode as well. Includes GN sword II short and GN sword II long. Because of new gimmicks, you can display the finished product in Rifle Mode, or with the blade’s edges shooting out. Includes two GN katal, which can rotate about their axis when they are attached on the legs.
$20.00
-
Gunpla: Mobile Suit Gundam 00 - "GN-001 Gundam Exia", MG 1/100
This version of the Gundam Exia from Gundam 00 is faithfully recreated in stunning proportion and flexibility. Green translucent plastic complete with laser etched engravings recreate its GN condenseres while special holographic film replicates the GN cables dotting its body. This kit also includes a GN Long Blade, a GN Short Blade, two GN Beam Daggers, two GN Beam Sabers, a GN Sword that can switch between rifle and gun mode, plus a GN Shield with sides that can slide out.
$52.00
-
Gunpla: Mobile Suit Gundam 00 - "GN-001REII Gundam Exia Repair II", HG 1/144
Introducing the Bandai 44 Gundam Exia Repair II from the Gundam 00 series. This high-grade model kit is perfect for Gundam enthusiasts and collectors alike. With its intricate details and easy assembly, you can recreate the iconic Exia Repair II in no time. The kit includes various weapons and accessories, allowing you to customize your Gundam to your liking. Don't miss out on adding this impressive model to your collection. - High-grade model kit from the Gundam 00 series- Intricate details and easy assembly- Recreate the iconic Exia Repair II- Includes various weapons and accessories- Perfect for Gundam enthusiasts and collectors- Customize your Gundam to your liking- Impressive addition to any collection
$18.00
-
Gunpla: Mobile Suit Gundam 00 - "GN-002 Gundam Dynames", MG 1/100
This is the MG Dynames Gundam 1/100 Action Figure Model Kit from Bandai. Gundam Dynames from "Mobile Suit Gundam 00" makes its MG debut with a completely new model, offering unparalleled detail and articulation. The kit features a GN sniper rifle with a deployable stand, allowing you to recreate the iconic "sniper" stance with the body lying on the ground. With a head gimmick for sniper pose movement and a leg joint structure for tension-filled poses, the Dynames Gundam delivers a dynamic display. Additional MG-specific features include the deployment of GN full shields, waist and knee missiles, hatch opening and closing for signal bullets, and GN thruster deployment gimmicks. NOTE: Photo of completed model is for illustrative purposes only. This is a model kit that requires assembly. Features: Sniper Rifle Stance: GN sniper rifle stand deploys for the "sniper" stance. Dynamic Poses: Head gimmick and leg joint structure for tension-filled poses. GN Full Shield: Reproduces the deployment of GN full shield. MG-Specific Gimmicks: Waist and knee missiles, hatch opening and closing, and GN thruster deployment. Includes: (1) MG Dynames Gundam 1/100 Action Figure Model Kit Needed to Complete: (1) Sprue Cutter/Hobby Knife Paint and Finishing Tools as Needed
$47.00
-
Gunpla: Mobile Suit Gundam 00 - "GN-003 Gundam Kyrios", HG 1/144
This Gundam Kyrios is a transforming model from season 1 of the Gundam 00 anime. With its transforming ability, submachine guns and shields, this will be quite the addition to any collection!
$20.00
-
Gunpla: Mobile Suit Gundam 00 - "GN-004 Gundam Nadleeh", HG 1/144
The GN-004 Gundam Nadleeh‘s distinctive lens unit is molded in translucent plastic for a nice visual flare, but this kit is more than just good-looking. In addition to thigh joints with improved articulation, the torso can lean forward and back for angled poses. Includes new GN beam rifle, GN beam saber, and shield. It can also hold the GN cannons of the HG Gundam Virtue to replicate the Gundam Nadlee’s armament in the animation.
$15.00
-
Gunpla: Mobile Suit Gundam 00 - "GN-006GNHW/R Cherudim Gundam GNHW/R", HG 1/144
Based on the Mobile Suit Gundam 00 anime, the model kit features the Cherudim Gundam GNHW/R.
$25.00
-
Gunpla: Mobile Suit Gundam 00 - "GN-007GNHW/M Arios Gundam GNHW/M", HG 1/144
The Arios Gundam, complete with weapons used in the final battle in the second season of Gundam-00, can join your collection as this snap-fit HG plastic kit! The model transforms between Mobile Mode and Flight Mode, and it can be equipped with weapons that include Long Beam Rifle, Twin Beam Rife, Beam Sabers, and missiles. Some assembly required.
$25.00
-
Gunpla: Mobile Suit Gundam 00 - "GN-009 Seraphim Gundam", HG 1/144
The hidden power of the Gundam Seravee is this back mounted Gundam that can separate and move! Included are GN Beam sabers and it can be combined with HG00 Seravee Gundam to replace its static backpack.
$15.00
-
Gunpla: Mobile Suit Gundam 00 - "GN-011 Gundam Harute", HG 1/144
Based on the Mobile Suit Gundam 00 the Movie: A Wakening of the Trailblazer anime film, the Gundam Harute model kit is in 1/144 scale and becomes a fully articulated figure once complete and can also be transformed into flight mode. The Gundam Harute comes with GN Sword Rifle, GN Missile Container and GN Cannon. Clear parts and foil stickers are included.
$23.00
-
Gunpla: Mobile Suit Gundam 00 - "GNT-0000 00 Qan[T]", MG 1/100
Based on the final Mobile Suit in the film Gundam 00 movie Awakening of the Trailblazer, the 00 Qan[T] joins the MG line in full splendor. Internal frame parts along with clear translucent parts bring out the iconic features of this design. Optional LED (sold separately) can be used to light up portions of the kit. Its sword bits are deployable and are able to be displayed in multiple ways. A stand to help support one of its massive weapon modes included.
$61.00
-
Gunpla: Mobile Suit Gundam 00 - "GNT-0000 00 Qan[T]", RG 1/144
A new Real Grade from the Gundam 00 universe! The successor to the Exia and 00 Gundam, the 00 Quanta (Qan[t]) incorporates the Real Grade line's philosophy of utilizing real world inspiration for the fictional technologies of the Gundam universe. To recreate the GN Drive docking and the GN Shield's range of movement as seen in the Gundam 00 movie, "Awakening of the Trailblazer", a series of mechanical mounts and swinging joints have been utilized. Frame features special modifications to allow the wrist to run parallel with the arm so the sword can be held horizontally. All weapon gimmicks including conversion between sword and rifle forms have been faithfully recreated. Product Features Approximately 5 inches tall 1/144 scale Use of mechanical mounts and swinging joints Instructions may or may not include English translation No glue required for assembly, a hobby nipper is required to remove parts from runners
$34.00
-
Gunpla: Mobile Suit Gundam 00 - "GNW-001 Gundam Throne Eins", HG 1/144
Featured in the Mobile Suit Gundam 00 anime series, this Throne Eins model kit is a great addition to any Gundam collection! This Gundam features a Beam rifle and 2 Beam sabers.
$21.00
-
Gunpla: Mobile Suit Gundam 00 - "GNW-002 Gundam Throne Zwei", HG 1/144
Based on the Mobile Suit Gundam 00 anime, this Throne Zwei Gundam is a great addition to any collection! It features the sword and shield as seen in the popular anime.
$21.00
-
Gunpla: Mobile Suit Gundam 00 - "GNW-003 Gundam Throne Drei", HG 1/144
Based on the Mobile Suit Gundam 00 anime, the Throne Drei model kit is in 1/144 scale and becomes a fully articulated figure once complete. The Throne Drei comes equipped with a GN Mega Launcher and the GN Stealth Field. Throne Drei can connect with Gundam Throne Eins through the included bendable wire to charge its GN mega launcher.
$21.00
-
Gunpla: Mobile Suit Gundam 00 - "GNX-603T GN-X", HG 1/144
Utilized by the UN Forces, this mecha was designed after a leak of data from Celestial Being allowing the manufacture of solar furnaces. These mecha are usually used en masse and contain the same GN drive as a Gundam Throne, and thus can stand up to a Gundam. A relatively simple kit, this HG GN-X is good for beginning modelers. The instructions are simple and easy to understand, and the pieces are molded in colour and snap together, so you can complete the model without glue or paint. Stickers are included for the purple sections. For best durability and appearance, gluing and painting are possible. Multiple armaments are included to be modeled, including a beam rifle, as well as a longer barrel attachment, shield, and two swords. Interchangeable hands allow for swapping of weapons after completion.
$15.00
-
Gunpla: Mobile Suit Gundam 00 - "GNX-Y901TW Susanowo", HG 1/144
From the Mobile Suit Gundam 00 anime comes a 1/144 scale High Grade Gundam 00 model kit of Susanowo!
$20.00
-
Gunpla: Mobile Suit Gundam 00 - "SVMS-01 Union Flag", HG 1/144
Featured in the Mobile Suit Gundam 00 anime series, this SVMS-01 Union Flag model kit is a great addition to any Gundam collection! This Gundam can transform into flight mode.
$13.00
-
Gunpla: Mobile Suit Gundam 00 - "SVMS-01O Over Flag", HG 1/144
Featured in the Mobile Suit Gundam 00 anime series, this Over Flag model kit is a great addition to any Gundam collection! This Gundam can transform to flight mode and high-speed cruise mode.
$15.00
-
Gunpla: Mobile Suit Gundam 00 - Master Grade: Gundam Virtue
The Gundam Virtue, the Gundam piloted by Tieria Erde in Mobile Suit Gundam 00, finally joins the MG series lineup! The Gundam Virtue’s most iconic feature, the transition into the Gundam Nadleeh, can be recreated. The kit is full of various gimmicks, and its proportions have been re-considered under MG series standards. A wide range of armaments such as the GN Bazooka and Gundam Nadleeh Beam Rifle are included. Accessories:GN Cannons x2GN Boozka x1GN Shield x1GN Beam Sabers x2GN Beam Rifle x1GN Beam Rifle effect part x1GN Drive x1Solar Reactor x1Figures x3 typesFoil stickers x1Marking stickers x1Polypropylene Sheet x1
$91.00
-
Gunpla: Mobile Suit Gundam 0083 - Gelgoog Marine Commander Type (Cima Custom)
The long-awaited kit of Gelgoog Marine Commander Type (Cima Custom), which defeated Gundam GP01 in Mobile Suit Gundam 0083, is finally available in 1/144 HGUC line.This kit has undergone a refined settings to achieve the best proportions. The rear skirt with built-in the vernier nozzles have been precisely reproduced. Ploycaps are used in joints, which allow for a wide range of articulation and optimizing the appearance. The left hand can be replaced with a open hand part.Comes with a customized beam rifle, a commander's shield and a 90mm machine gun.
$20.00
-
Gunpla: Mobile Suit Gundam 0083: Stardust Memory - "AGX-04 Gerbera Tetra", HG 1/144
Gerbera Tetra, the legendary fourth design in the Gundam Development Project that was deployed in the Delaz Fleet gets an HGUC 1/144 scale model kit!
$25.00
-
Gunpla: Mobile Suit Gundam 0083: Stardust Memory - "Gundam GP01Fb ", MG 1/100 (Pre-Order)
This item is a pre-order item with an expected release date of Q2 2026 Orders containing a pre-order items WILL NOT SHIP until the final pre-order item is able to be shipped. Dates and product details are subject to change as new information from the manufacturer is updated. From the Mobile Suit Gundam 0083: Stardust Memory anime comes Master Grade model kit of the iconic Gundam "Zephyranthes" Full Burnern in 1/100 scale! Besides the standard beam saber, shield and rifle accessories, the "Core Fighter" and "Core Block Thruster" pulls out of the middle of the model and transforms into a jet fighter-type vehicle. Product Features 1/100 Scale Made of plastic Part of the Master Grade model kit line From Mobile Suit Gundam 0083: Stardust Memory Box Contents Pieces to build Gundam "Zephyranthes" Full Burnern Beam rifle Beam saber Collapsible shield E-pack ammo Instructions
$40.99
-
Gunpla: Mobile Suit Gundam 0083: Stardust Memory - "RGC-83 GM Cannon II", HG 1/144
This upgraded variant of the GM Cannon from Gundam 0083 features heavy armor around its main body. Its over the shoulder cannons are can move up and down and is equipped with beam saber in forearm, GM Rifle, and shield with spare ammo clips.
$17.00
-
Gunpla: Mobile Suit Gundam 0083: Stardust Memory - "RX-78GP01 Gundam "Zephyranthes"", HG 1/144
Based on Mobile Suit Gundam 0083: Stardust Memory, the RX-78GP01 Gundam Zephyranthes model kit is in 1/144 scale and becomes a fully articulated figure once complete. The RX-78GP01-Fb Gundam Zephyranthes comes with a shield, beam saber, beam rifle and also includes parts to build a little Core Fighter II.
$17.00
-
Gunpla: Mobile Suit Gundam 0083: Stardust Memory - "RX-78GP01 Gundam "Zephyranthes"", RG 1/144
The Gundam "Zephyranthes" joins the Real Grade model kit series in 1/144 scale alongside the separately-sold Full Burnern custom! Build its Core Block System to house a Core Fighter II escape craft for a realistic display. When completed, you can arm it with its beam rifle and shield to recreate scenes from the anime and manga.
$31.00
-
Gunpla: Mobile Suit Gundam 0083: Stardust Memory - "RX-78GP02A Gundam Physalis", MG 1/100
Product Description Based on Mobile Suit Gundam 0083: Stardust Memory, the Gundam "Physalis" model kit is in 1/100 scale and becomes a fully articulated figure once complete. The "atomic bazooka" can be mounted in the hand in firing position, or it breaks down into two pieces, the barrel mounting in the inside of the shield, with the remainder mounting on the GP02's back. Product Features 1/100 Scale Made of plastic From Mobile Suit Gundam 0083: Stardust Memory Part of the Master Grade model kit line Instructions may or may not include English translation No glue required for assembly, a hobby nipper is required to remove parts from runners Box Contents Pieces to build Gundam Physalis Atomic bazooka Beam saber Shield Instructions
$54.99
-
Gunpla: Mobile Suit Gundam 0083: Stardust Memory - "RX-78GP03S Gundam "Stamen"", MG 1/100 (Pre-Order)
This item is a pre-order item with an expected release date of July 2026 Orders containing a pre-order items WILL NOT SHIP until the final pre-order item is able to be shipped. Dates and product details are subject to change as new information from the manufacturer is updated. From the Mobile Suit Gundam 0083: Stardust Memory anime comes Master Grade model kit of the iconic Gundam Stamen in 1/100 scale! Includes a folding bazooka, beam rifle, beam saber and folding shield. The core fighter is detachable. Armor is detachable to expose the skeleton and hydraulics.
$49.00
-
Gunpla: Mobile Suit Gundam 00V: Battlefield Report - "GN-0000+GNR-010/XN 00 XN Raiser", MG 1/100
From the "Mobile Suit Gundam 00V" side story, the 00 XN Raiser is coming to the MG line-up! A combination of the 00 Gundam and the XN Raiser, the 00 XN Raiser comes equipped with a pair of GN Buster Sword III units that can be combined into one weapon! The 00 XN Raiser's arm pylons can open and close and can hold the GN Sword II and GN Beam Sword. It is also possible to mount the GN Beam Sword. 4 types of battle styles can be reproduced for added display value. Switch between multiple battle modes instantly. One LED unit (green) can be mounted on the head (batteries LR41 x2 sold separately). Water-slide decals for added detailing are included. Product Features 7 inches (17.78cm) once assembled Plastic model kit From the "Mobile Suit Gundam 00V" side story Comes equipped with a pair of GN Buster Sword III units LED unit (green) can be mounted on the head (batteries LR41 x2 sold separately) Box Contents 1/100 00 XN Raiser parts 2 GN Buster Sword III units GN Beam Saber GN Shield Decals
$105.00
-
Gunpla: Mobile Suit Gundam 00V: Battlefield Report - "GN-001/hs-A01D Gundam Avalanche Exia", MG 1/100
Item is a plastic model kit and assembly is required
$81.00
-
Gunpla: Mobile Suit Gundam AGE - "AGE-1 Gundam AGE-1 Normal", HG 1/144
Based on the Mobile Suit Gundam AGE anime this AGE-1 Gundam AGE-1 Normal model kit is in the 1/144 scale and becomes a fully articulated figure once built. The Gundam AGE-1 Normal comes with a beam rifle, beam shield, and 4 beam sabers.
$15.00
-
Gunpla: Mobile Suit Gundam AGE - "AGE-1G Gundam AGE-1 Glansa", HG 1/144
Based on the Mobile Suit Gundam AGE anime, this Gundam AGE-1 Gransa model kit is in the 1/144 scale and becomes a fully articulated figure once built. The kit is molded in multiple colors and includes stickers and decals for additional details.
$21.00
-
Gunpla: Mobile Suit Gundam AGE - "AGE-2 Gundam AGE-2 Normal", HG 1/144
The Gundam AGE-2 Normal is a powerful transformable Mobile Suit created using combat data from the original Gundam AGE-1 Normal. The Gundam AGE-2 Normal uses the same AGE System as its predecessor, which can provide the Mobile Suit with various “Wear Packs” developed by the AGE Builder using data gathered by the Gundam AGE-2 Normal’s AGE Device during combat. Unlike the previous Gundam AGE, the AGE-2 Normal features a transformable frame to achieve a high-speed Strider Mode. While in Strider Mode, the Gundam AGE-2 Normal could travel at three times the speed of Mobile Suit Mode while retaining access to its Hyper DODS Rifle, providing a significant advantage over standard Mobile Suits.
$20.00
-
Gunpla: Mobile Suit Gundam AGE - "AGE-2 Gundam AGE-3 Normal", HG 1/144
The HGAGE 1/144 Gundam AGE-3 Normal from "Mobile Suit Gundam AGE" brings an impressive transformation mechanism, allowing builders to assemble the Core Fighter and G Cepter separately and combine them to form the full AGE-3 suit. This model kit features the powerful SigMaxiss Rif., translucent effect parts for the beam saber, and a custom display stand. Highly articulated and molded in color, the AGE-3 Normal is designed for easy snap-fit assembly, making it a fantastic addition to the HG Gundam AGE lineup.
$21.00
-
Gunpla: Mobile Suit Gundam Build Metaverse - "Amazing Barbatos Lupus", HG 1/144
Features: Main body and booster separation and merging Combined weapons of boosters and maces Claw with deployment and rotation gimmick Tail blade represented with a lead wire Deployable grip on the mace for shooting mode reproduction Includes: (1) Gundam Amazing Barbatos Lupus model kit (1) Mace (1) Lead wire (1) Pedestal (1) Instructions Needed to Complete: (1) Sprue Cutter/Hobby Knife Paint and Finishing Tools as Needed
$27.00
-
Gunpla: Mobile Suit Gundam F91 - "Gundam F91 (Ver 2.0)", MG 1/100
Item is a plastic model kit and assembly is required
$54.00
-
Gunpla: Mobile Suit Gundam GQuuuuuuX - "gMS-α Red Gundam", HG 1/144
From Mobile Suit Gundam GQuuuuuuX, the iconic Red Gundam is now available in a highly detailed 1/144 HG scale model! This figure beautifully captures the distinctive coloring around the head and torso, staying true to the original design. It comes equipped with a wide variety of weapons to enhance its battle-ready look. The shield can be mounted on the arm or backpack with included joint parts, offering versatile display options. Additionally, two bits are included, which can be attached to the fuselage using joint parts, adding even more dynamic possibilities for action poses. This model is a must-have for fans and collectors alike. Product Features 1/144 Scale Made of plastic Based on the Mobile Suit Gundam GQuuuuuuX anime Multiple points of articulation Interchangeable parts and accessories Instructions may or may not include English translation Box Contents Pieces to build Red Gundam Armament set Hand parts Marking stickers Seal Instructions Additional Details Mobile Suit Gundam Mobile Suit Gundam is a Japanese media franchise popularized by the numerous anime and manga series that take place within the universe of the franchise. With a focus towards giant mecha that are piloted by humans, the space opera franchise is considered by many to contain some of the more memorable sci-fi designed robots and mecha in media. Mobile Suit Gundam continues to be a pop
$30.00
-
Gunpla: Mobile Suit Gundam MSV - "RGM-79FP GM Striker", HG 1/144
Based on Mobile Suit Zeta Gundam, this RGM-79FP GM Striker model kit is in 1/144 scale and becomes a fully articulated figure once built. Product Features 1/144 Scale Made of PS, PE Based on Mobile Suit Gundam Side Story: Missing Link Part of the High-Grade Universal Century model kit line
$17.00
-
Gunpla: Mobile Suit Gundam MSV Encounters in Space - "RX-78-4 Gundam Unit 4 "G04"", MG 1/100
1/100 Scale Master Grade very detailed assembly model kit. Comes with a snap-fit assembly, matching-colored pieces, accessories and fully illustrated construction manual. Paint and glue not required
$40.00
-
Gunpla: Mobile Suit Gundam Narrative - "RX-0 Unicorn Gundam 03 Phenex", MG 1/100
Colored plastic No glue required Runner x27, Color Sticker x1, Slide Mark x1, Instruction Manual x1
$142.00
-
Gunpla: Mobile Suit Gundam SEED - "GAT-X103 Buster Gundam", MG 1/100
This is the Bandai GAT-X103 Buster Gundam, a Master Grade Action Figure Model Kit. From the impressive Gundam Seed model series, Buster Gundam has proudly been released! Buster Gundam comes complete with its mighty Impulse Rifle, Gun Launcher, and Shoulder Missile Pods. This kit also features lots of polycaps for great poseability and foil stickers for some of the smaller details. A 1/20 scale unpainted figure of pilot Dearka Elsman is included with the kit, too! Buster Gundam is pre-colored and snap-together, so paint and glue are not needed to complete it. Like all Bandai Japan models, the instructions for assembly are in Japanese, but they feature very clear, easy-to-follow pictures. Decals are included to add realism and additional Gundam markers can be purchased to outline panels and add details. Features: Highly detailed plastic pieces molded in different colors. May be further customized with model paints if desired. Snap together kit (Requires no glue) Hobby nippers needed to remove parts from parts trees. Model can be posed in various positions Several hand held weapons Colorful decals Pictorical instructions written in Japanese
$49.00
![Gamers Guild AZ Bandai Gunpla HG00 - Gundam 00, #45 O Gundam [Type A.C.D.] (Pre-Order) AGD](http://www.gamersguildusa.com/cdn/shop/files/gamers-guild-az-bandai-gunpla-hg00-gundam-00-45-o-gundam-type-a-c-d-pre-order-agd-1141244960.webp?height=465&pad_color=fff&v=1765392061&width=645)
![Gamers Guild AZ Bandai Gunpla MG - Gundam 00, 00 QAN[T] (Pre-Order) AGD](http://www.gamersguildusa.com/cdn/shop/files/gamers-guild-az-bandai-gunpla-mg-gundam-00-00-qan-t-pre-order-agd-1133095976.webp?height=465&pad_color=fff&v=1740166323&width=645)
You have seen 2304 out of 2681 products